Text Lesson 5: The implant installation position is marked on the axial slice or in the 3D window using the Section point tool. After selecting the desired position on the cross-section view, carry out implant insertion. The Create implant tool is activated using the relevant button on the toolbar. When this tool is activated, an implant installation cursor appears. In order to insert an implant, you should create a cortical point by pressing the left mouse button. Then, hold it down, move the cursor to the position of the axial point and release the button. When you are moving the cursor, the program offers a suitable implant from the database. The implant position can be adjusted using the Move tool, Rotate tool, or the implant manipulator. In the case of edentia, if there are no orientators for correct positioning of the implant, you should carry out scanning with an X-ray template. After turning on the visibility of the mask and 3D models of the template, optimize the position relative to the future orthopedic structure and volumes of anatomical structures. After inserting the implant, you can replace it with another. To do this, go to the Properties of implant panel and select the desired implant manufacturer, series and size. The implant number can be changed by assigning it a name conforming to the segment where it is located. To insert the next implant, go to the Operations with implants menu, choose the number of the implant with adjusted position and copy it in the right direction and at a distance corresponding to the position of the next implant. An implant simultaneously copied requires correction of the occlusal curve, since it can rarely match the panoramic curve along which the implants are copied. This can be done using the Move tool located in the Operations with implants menu. There you can chose the desired direction and distance. Then, if necessary, you can change the position and size of the implant in the cross-section. Link to file high quality: www.cdi.ru/Lessons_IA/2_implants_big_eng.avi.zip